MIL-DTL-62265C(AT)
DRAWINGS
ARMY
12257235
- Filter Element and Relief Valve Assembly.
12270316
- Filter Element and Relief Valve Assembly.
(Copies of these drawings are available from the U.S. Army Tank-automotive and
Armaments Command, ATTN: AMSTA-TR-E/BLUE, Warren, MI 48397-5000.)
2.3 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.2.
3.2 Materials. Materials used shall be in accordance with the manufacturer's materials
specifications for hydraulic valves. The materials shall be capable of meeting all the operational
and environmental requirements specified herein (see 4.8). Recovered materials shall be used to
the maximum extent practicable.
3.2.1 Metals. All metals used in the construction of the assembly shall be
corrosion-resistant or shall be adequately protected to resist corrosion during the normal service
life of the filter element (see 4.8).
3.2.2 Dissimilar metals. The use of dissimilar metals in contact with each other shall be
avoided. Where contact between dissimilar metals is unavoidable, they shall be suitable protected
against electrolytic corrosion (see 4.8).
3.2.3 Filter element material. The material of the filter element shall not change the
composition of the hydraulic fluid MIL-H-46170, nor shall the material be altered enough to use
or storage to affect the intended function of the filter element (see 4.8).
3.2.4 Hazardous materials. Asbestos, cadmium, and radioactive material shall not be used
in this item. Radioactive material is defined by CFR, Title 10, Parts 30 and 40, and other
radioactive material in which the specific activity is greater than 0.002 microcuries per gram or the
activity per item equals or exceeds 0.01 microcuries (see 4.8).
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business