A-A-50498 - Valve, Foot, Cast Iron, Bronze And Polyvinyl Chloride (Pvc)
A-A-50558 - Valves, Pressure Regulating, Steam (No S/S Document)
This commercial item description covers steam pressure regulating valves that transform steam from a specified initial pressure to a specified final reduced discharge pressure or range of pressures. The specified inlet steam pressures range from 15 pounds per square inch gage (psig) to 1,500 psig (103 kiloPascals gage (kPa(gage)) to 10,343 kPa(gage)). The steam pressure regulating valves covered by this commercial item description are intended for transforming steam from a specified initial pressure to a specified final reduced discharge pressure or range of pressures in steam systems.
A-A-50541 - Valves, Tank Float, Angle And Globe Pattern
This CID covers internal-pilot-actuated tank float valves of the angle and globe pattern for use with salt or fresh water at pressures between 15 and 125 pounds per square inch gage (psig) and temperatures up to 90 degrees Fahrenheit (F).
A-A-52597 - Valves, Check: Swing, Cast-Iron And Steel
This CID covers requirements for cast-iron and steel swing check valves, hereinafter referred to as "valves", designed for liquid or gaseous petroleum products.
AN6012 - ( Images) Valve, High Pressure Oxygen Line
AN6014 - Valve - High Pressure Oxygen Check, Style A
AN6015 - ( Images) Valve - High Pressure Oxygen Check (Style B)
AN6016 - Valve-High Pressure Oxygen Check, Style C
AN6017 - ( Images) Valve - High Pressure Oxygen Check, Style D
AN6018 - ( Images) Valve High Pressure Oxygen Check, Style E
AN6024 - ( Images) Valve, Filler Low Pressure Oxygen (Future Acquisition Use Mil-Prf-7891)
AN6204 - ( Images) Valve, Hydraulic Bleeder
AN6207 - ( Images) Valve, Check, 1500 Psi, Hydraulic
AN6211 - ( Images) Valve - In Line Type 6 Gpm Hydraulic Directional Control
AN6213 - ( Images) Valve - Radial Type 3-1/2 G.P.M. Hydraulic Directional Control
AN6214 - ( Images) Valve - Radial Type 6 Gpm Hydraulic Directional Control
AN6277 - ( Images) Valve - Hydraulic Shuttle, 3000 Psi (International Thread Tube Fitting Outlet) (S/S By Ms28767)
AN6278 - ( Images) Valve Hydraulic-Shuttle, 3,000 Psi (Universal And Internal Thread Fitting Outlet)
AN6287 - ( Images) Valve - Air High Pressure 3/4 Hex
AN6293 - ( Images) Valve, 4-Way Rotary Selector, 3,000 Psi, Non-Interflow
AN6294 - ( Images) Valve, 4-Way Rotary Selector, 3000 Psi, Interflow
AN770 - Cock-Drain (See Ms35784)
AN771 - Cock - Screw Type Drain (S/S By Ms 35782)
AN812 - Body-High Pressure Air Valve (Use Ms28889)
AN813 - Cap, High-Pressure Air Valve (S/S By Ms-20813)
AND10067 - ( Images) Valve Installation - Hydraulic Bleeder (Standard Dimensions For)
API-SPEC-6 - Valves, Pipeline (Gate, Plug, Ball, And Check Valves), Specification For
This specification covers flanged and butt-welding gate, plug, ball, and check valves.
API-SPEC-6FA - Fire Test For Valves, Specification For - First Edition
API-STD-526 - Steel, Flanged, Pressure Relief Valves
This standard is a purchase specification for flanged steel pressure relief vales. Basic requirements are given for direct spring-loaded pressure relief valves and pilot-operated pressure relief valves as follows: a. Orifice designation and area. b. Valve size and pressure rating, inlet and outlet. c. Materials. d. Pressure-temperature limits. e. Center-to-face dimensions, inlet and outlet. For the convenience of the purchaser, a sample specification sheet is given in Appendix A. Nameplate nomenclature and requirements for stamping are detailed in Appendix B.
API-STD-527 - Seat Tightness Of Pressure Relief Valves
This standard describes methods of determining the seat tightness of metal-and soft-seated pressure relief valves, including those of conventional, bellows, and pilot-operated designs.
API-STD-593 - Valves, Ductile Iron Plug, Flanged Ends
This standard covers ductile iron plug valves with flanged ends, in sizes NPS 1 through 24, corresponding to nominal pipe sizes in ANSI-B36.10.
API-STD-594 - Wafer And Wafer-Lug Check Valves
This standard covers cast iron, ductile iron, carbon steel, alloy steel, and nickel-alloy wafer and wafer-lug, single-and dual-plate check valves with dimensions that permit installation between flanges complying with ASME-B16.1, B16.5, or B16.42; MSS-SP-44; or API Standard 605.
API-STD-598 - Valve Inspection And Testing
This standard covers inspection, examination, supplementary examinations, and pressure test requirements for resilient-seated, nonmetallic-seated (e.g. ceramic), and metal-to-metal-seated valves of the gate, globe, plug, ball, check, and butterfly types.
API-STD-599 - Steel And Ductile Iron Plug Valves
This standard covers steel, alloy steel, and stainless steel plug valves with flanged or butt-welding ends and ductile iron plug valves with flanged ends in sizes NPS 1 through NPS 24, which correspond to nominal pipe sizes in ASME B36.10M.
API-STD-600 - Steel Gate Valves-Flanged And Butt-Welding Ends
This standard covers steel gate valves with flanged or butt-welding ends in sizes NPS 1 through NPS 24.
API-STD-607 - Valve, Fire Test For Soft-Seated Quarter-Turn
This standard covers the requirements for testing and evaluating the performance of soft-seated quarter-turn valves when exposed to a fire, as defined in this standard. The procedure applies to all classes and sizes of such valves.
API-STD-609 - Lug And Wafer-Type Butterfly Valves
ASHRAE17 - Method Of Testing For Capacity Rating Of Thermostatic Refrigerant Expansion Valves
This standard includes thermostatic expansion valves which have nominal capacities up to and including 135,000 Btu/h (39.6 kW) of refrigeration effect at 40Deg F (4.4Deg C) evaporator temperature.
AWWA-C500 - Value, Gate, 3 Through 48 In. Nps, For Water And Sewage System
This standard covers iron-body, bronze-mounted, nonrising stem gate valves, 3 through 48 in. NPS* in diameter, and outside screw and yoke rising-stem gate valves (OS&Y), 3 through 12 in. NPS, with either double-disc gates having parallel or inclined seats, or solid-wedge gates.
AWWA-C504 - Valves, Butterfly, Rubber-Seated,, American Water Works Association Standard For
This standard covers cast-iron and ductile-iron body, rubber-seated, tight-closure butterfly valves, 3-72 in. in size, with various body types and body ends for maximum shutoff pressures and operating torques, as indicated in Table 1, and for fresh water having a pH greater than 6 and temperatures generally less than 125 degree F (52 deg C).
AWWA-C506 - Backflow Prevention Devices-Reduced Pressure Principle And Double Check Valve Types, Awwa Standard For
AWWA-C508 - Valves, Swing-Check, For Ordinary Waterworks Service, Awwa Standard For
This standard covers iron-body, bronze-mounted swing-check valves, 2-24 inch NPS, for normal horizontal installation in water systems.
AWWA-C509 - Valve, Gate, Resilient-Seated For Water & Sewerage Systems
This standard covers iron-body resilient-seated valves with nonrising stems (NRS) and outside screw-and-yoke (OS&Y) rising stems for installation in water and sewerage systems.
AWWA-C510 - Valve, Double Check, Backflow-Prevention Assembly
This standard covers the double check valve backflow-prevention assembly.
AWWA-C511 - Assembly, Principle Backflow-Prevention, Reduced-Pressure
This standard covers the reduced-pressure principle backflow-prevention assembly.
DOD-V-24675 - Valves, Boiler Blow Service, Monel, Shipboard Use
This specification covers 1-1/2 inch monel (nickel-copper) valves for use in boiler blow systems other than the first valve off a boiler drums and headers, 600 and 1500 pounds per square inch (lb/in2) service.
MIL-A-24780 - Actuating Assembly, Single Linear Motion, For The Remote Actuation Of Quick Acting Valves, General Specification For
This specification covers the requirements for a mechanical assembly used to apply a force through a single linear motion from a remote location for actuating quick acting valves. The assembly consists of an encased core mechanism, a valve end fitting, core juction boxes, and trip handles (see figure 1). Assemblies covered by this specification should be furnished in one class meeting the requirements specified herein.
MIL-C-1203 - Cocks, Drain, Cocks, Plug, And Cocks, Shutoff, Screw Stem (S/S By A-A-59440)
This specification covers brass drain cocks and shutoff cocks in nominal sizes of 1/8-inch through 2-inch.
MIL-C-17651 - Compressor, Reciprocating, Power Driven, Diver'S Air Supply
MIL-C-22546 - Cocks, Air, Cut-Out
This specification covers two-way, two-port, compressed-air cut-out cocks having bronze bodies and lever-type operating handles.
MIL-D-17650 - Disk, Valve, Rubber; Insert Type (S/S By Mil-R-6855)
This specification covers insert type rubber valve disks for sprinkler, void tank flooding in sea water service.
MIL-DTL-19068 - Valve, Shuttle, Hydraulic, Aircraft, Type Ii Systems
This specification covers shuttle valves for use in aircraft hydraulic systems operating at 3000 psi pressure and temperature range from -65 to +275 degrees F.
MIL-DTL-19772 - Valves, Temperature Regulating, Automatic, Naval Shipboard
This specification covers automatic temperature regulating valves for steam, water, and other fluid service where accurate temperature control of fluid is required. These valves are of the self-operated type requiring no external power supply such as oil, water, steam, electricity, or compressed gas for their operations. However, when the fail safe mode is required, it can be externally powered.
MIL-DTL-23450 - Valves, Expansion, Thermostatic, Refrigerant-12 (R-12) And Refrigerant-22 (R-22)
This specification covers two types and two styles of thermostatic expansion valves for use with refrigerant 12 (R-12) and refrigerant 22 (R-22).
MIL-DTL-23953 - Valves, Combined Vent-Check, For Submarine Mbt Blow Lines (Sizes 2.00 And 2.50 Inches)
This specification covers the construction, testing, and operation of combined vent-check valves with a nominal pressure seating of 4,500 pounds per square inch gage (psig), for use in submarine main ballast tank (MBT) high-pressure air blow lines (sizes 2.00 and 2.50 inches).
MIL-DTL-24630 - Valves, Check, In-Line, For Hydraulic Fluid And Lubricating Oil Fluid, General Specification For
This specification covers the requirements for in-line check valves for use in hydraulic fluid and lubricating oil fluid systems of naval ships operating up to a maximum pressure of 3,000 pounds per square inch (lb/in-�).
MIL-DTL-24630/1 - Valves, Check, In-Line, Non-Reversible Installation For Hydraulic Fluid And Lubricating Oil Fluid
MIL-DTL-27166 - Valve, Pressure Equalizing, Gaseous Products
This specification covers low pressure equalizing, gaseous product valves for use in shipping containers.
MIL-DTL-3155 - Valve, Temperature-Regulating Ventilation Heater, Steam Control, Naval Shipboard Use
This specification covers thermostatic-controlled steam valves for temperature regulation of shipboard ventilation heaters. These valves are of the self-operated type, requiring no separate power source such as electricity or compressed air.
MIL-DTL-5523 - Valve; Relief, Hydraulic Pressure
This specification establishes the requirements for hydraulic pressure relief valves.
MIL-DTL-62265 - Filter Element And Relief Valve, Fluid Pressure, Hydraulic (M-60 Tank Series)
This specification covers the performance and manufacture requirements for a hydraulic filter element and relief valve, disposable type, 3 and 5 micron filtration, herein referred to as the assembly.
MIL-DTL-81940/4 - Valve, Sampling And Bleed, Hydraulic, 3000 Psi Non-Aircraft Applications
MIL-G-18916 - Governors, Steam Driven Pump, Pressure Regulating, Naval Shipboard
This specification covers the requirements applicable to the design and construction of pump pressure regulating governors for steam driven pumps for miscellaneous services aboard Naval ships.
MIL-G-24745 - Governors, Steam Driven Pump, Pressure Regulating, Naval Shipboard, 600 Pounds Per Square Inch Steam Service
This specification covers the requirements applicable to the design and construction of self-contained piston operated pump pressure regulating governors.
MIL-HDBK-227 - Selection And Installation Of Regulating And Control Valves For Naval Shipboard Use
This handbook provides criteria for the selection and installation of regulating and control valves for Naval shipboard use.
MIL-M-12701 - Mount, Telescope, M30
MIL-PRF-12125 - Valve, Gate: Quick-Opening, Class 125 Cast Iron, With Position Lock
This specification covers 125-pound (Metric class PN10) class rating, cast-iron, bronze-trimmed, position-locked, quick-opening gate valves.
MIL-PRF-12126 - Valves, Gate: Bronze, Lever Operated, Quick Opening, 125 Psi And 150 Psi
This specification covers lever-operated, quick-opening, bronze gate valves with a solid-wedge or double-wedge disk and threaded ends.
MIL-PRF-13803 - Valve, Gate: Double-Disk, Cast-Iron Or Steel
This specification covers various sizes and classes of cast-iron and steel, doubledisk gate valves for liquid or gaseous petroleum products.
MIL-PRF-23256 - Valve Assembly, Seal
This specification covers the requirements for a seal valve assembly which serves as a sealing valve for a nitrogen receiver. The seal valve assembly consists of a seal valve and a filter cartridge assembly.
MIL-PRF-25675 - Valves, Check, Miniature, Hydraulic, Aircraft And Missile
This specification covers hydraulic, spring-loaded, normally closed aircraft and missile hydraulic system check valves with operating pressures up to 3,000 pounds per square inch (psi) and operating temperatures from -65 Deg. to 450 Deg. F.
MIL-PRF-25961 - Valve, Fill-Buildup-Vent, Liquid Oxygen Converter, Cru-50/A
This specification covers one type of liquid oxygen converter fill-buildup-vent valve for use in 70 and 300 pounds per square inch gage (psig) liquid oxygen (LOX) systems in aircraft. The valve is designated CRU-50/A.
MIL-PRF-25962 - Valve, Liquid Oxygen Drain
This specification covers one type of valve for draining 70 and 300 pounds per square inch gage (psig) liquid oxygen converters.
MIL-PRF-6164 - Valve; Aircraft, Pneumatic, High-Pressure Charging
This specification covers several types of high-pressure pneumatic valves for aircraft use.
MIL-PRF-62198 - Valve, Selector, Hydraulic Dump
This specification covers the M60 tank selector valve assembly which allows the pressure of the hydraulic system to be dumped (see 6.1).
MIL-PRF-62382 - Valve, Hydraulic, Pressure Relief (Metric)
This specification covers one type of in-line hydraulic pressure relief valve used in a military combat vehicle to control system differential pressure at a predetermined level.
MIL-PRF-62671 - Valve, Bypass, Fuel, Mechanical
This specification covers a mechanical fuel bypass valve, herein referred to as "the assembly".
MIL-PRF-8622 - Valve, High-Pressure, Oxygen-Cylinder, Automatic Opening
This specification covers the requirements of an automatic opening cylinder valve for use in aircraft high-pressure oxygen systems.
MIL-PRF-9050 - Valves, Oxygen, Pressure Relief, Aircraft
This specification covers aircraft pressure relief valves for 70 and 300 psig rated liquid oxygen (LOX) converters.
MIL-PRF-9439 - Valve, Oxygen, Cylinder, High Pressure
This specification covers manually operated, high pressure, aeronautical, oxygen cylinder valves.
MIL-R-13877 - Regulator, Oxygen, Acetylene, Welding Application (S/S By A-A-55540)
MIL-R-19180 - Regulator, Pressure, Compressed Gas
This specification covers regulators for control and indication of the discharge pressure, or flow, from storage cylinders of compressed gas.
MIL-R-47321 - Regulator, Pressure, Water Pumped Nitrogen
MIL-R-9198 - Regulator, Oxygen, High Pressure, Type Ma-1
This specification covers the general requirements for one type of high pressure oxygen regulator, designated type MA-1.
MIL-V-10386 - Valves, Check: Swing, Cast-Iron And Steel (S/S By A-A-52597)
This specification covers cast-iron and steel swing check valves designed for liquid or gaseous petroleum products.
MIL-V-10411 - Valves, Coupling (2 1/2 - And 4-Inch I.P.S.)
MIL-V-11201 - Valves, Safety Relief, Angle, Brass Or Bronze, Extra Heavy, For Gasoline Service
MIL-V-11820 - Valve, Safety
MIL-V-1187 - Valve, Angle, And Valves, Globe Bronze, Threaded 300 Pound Wsp Rating (S/S By Mss-Sp80)
MIL-V-1189 - Valve, Gate, Bronze
This specification describes gate valves for use in water, oil, gas, or steam services on shipboard.
MIL-V-12003 - Valves, Plug, Cast-Iron Or Steel, Manually Operated
This specification covers manually operated, lubricated and nonlubricated, tapered plug valves designed for gas, liquid or gaseous petroleum products, or water.
MIL-V-1202 - Valves Angle & Valves Globe Bronze (S/S By Mss-Sp80)
MIL-V-12217 - Valve, Float 3/4-Inch
MIL-V-13612 - Valves, Relief, Pressure & Temperature (For Hot Water Supply Systems) (Future Procurement Use Ansi-Z21.22)
MIL-V-15358 - Valve, Automatic Regulating, Pressure (Diaphragm Actuated And Controls, For Hi-Octane Gasoline Systems 125 P.S.I. Maximum W.P., 140 Deg. F Minimum)
MIL-V-15611 - Valves, Globe, Packless, Bronze
MIL-V-16271 - Valves, Tank Float, Angle And Globe Pattern (S/S By A-A-50541)
MIL-V-16302 - Valve, Stop, Diaphragm Type, Flanged (For Distilled Battery Water)
MIL-V-16468 - Valves, Shutoff, Hydrocarbon Fuel Service 100 P.S.I. And 150 P.S.I. Working Pressure
This specification covers shutoff valves for gasoline service where absolute tightness after repeated operations is essential and the seat tightness is not made with a lubricant seal.
MIL-V-16713 - Valve, Emergency Stop (For Hydraulically Operated Rocket Hoist)
MIL-V-16720 - Valves, Foot, Brass, And Polyvinyl Chloride (For Light Oil And Water) (S/S By A-A-50498)
MIL-V-16721 - Valves, Foot, Low Pressure, Cast-Iron (For Water) (S/S By A-A-50498)
This specification covers threaded-end and flanged-end and flanged-end cast iron foot valves for use with low-pressure water.
MIL-V-16722 - Valve, Pressure Regulating, Air, 1/4-Inch
MIL-V-16733 - Valves, Pressure Regulating, Steam (S/S By A-A-50558)
This specification covers steam pressure regulating valves that transform steam from a specified initial pressure to a specified final reduced discharge pressure or range of pressures.
MIL-V-17203 - Valve, Pressure Equalizing, Gaseous Products
MIL-V-17462 - Valve, Safety: Boiler (Shipboard Use)
This specification covers 1-1/2 inch and 2-1/2 inch boiler safety valves for steam drum and superheater service at working pressures of 600 and 1500 pounds per square inch (lb/in2).
MIL-V-17547 - Valves, Check, Bronze
This specification describes check valves of various types for low pressure air, water, and oil services.
MIL-V-17737 - Valves, Boiler Blow, Shipboard Use
This specification covers 1-1/2 inch blow valves (hard seat and disc) for bottom low, guarding, and header blow service at nominal working gage pressure of 600 or 1500 pounds per square inch.
MIL-V-17848 - Valve, Pressure Reducing, Steam Service
This specification covers self-contained pressure-reducing valves for steam service.
MIL-V-18030 - Valves, Control, Air-Diaphragm-Operated (Complete With Instrumentation)
This specification covers air-diaphragm-operated control valves complete with their associated instrumentation.
MIL-V-18034 - Valve, Pressure Regulating, Pilot Operated, Steam (S/S By Mil-V-16733)
MIL-V-18110 - Valves, Gate Type, Steel (Sizes 2-1/2 Inches To 16 Inches)
This specification covers steel gate valves in sizes 2-1/2 inches to 16 inches for steam, water and oil services on shipboard.
MIL-V-18114 - Valve, Atmospheric Exhaust And Back Pressure
MIL-V-18146 - Valve, Pressure Regulating, Water (S/S By Ansi A112.26.2-82)
MIL-V-18311 - Valve, Plug, Boiler Blow-Off, Straightway Type (S/S By Mil-V-18406)
MIL-V-18318 - Valve, Pressure Regulating, Oxygen System
This specification covers an oxygen pressure regulating valve.
MIL-V-18406 - Valve, Blow Off, Boiler
MIL-V-18433 - Valves, Temperature Regulating (Thermostatically Controlled) (S/S By A-A-50559)
This specification covers temperature-regulating valves designated to maintain fairly constant temperatures in heaters and storage tanks by regulation of the inlet fluid flow of the heating or cooling medium.
MIL-V-18434 - Valve, Gate Globe, & Angle, Steel (Use Ansi B16.34)
MIL-V-18436 - Valves, Check, Bronze, Cast Iron, And Steel Body
This specification covers bronze, cast-iron, and steel body check valves with regrinding, renewable, or regrinding-renewable disks and seats.
MIL-V-18447 - Valve, Stop Check, Nonreturn, Automatic
MIL-V-18489 - Valve, Pressure Regulating, Differential Control
MIL-V-18634 - Valves: Safety, Relief, And Safety-Relief (S/S By Asme-B16.34 And Astm-F1508)
This specification covers direct spring-loaded, pressure relief valves for steam, gas, vapor, and liquid service on boilers, hot water generators, nuclear vessels, and unfired pressure vessels constructed in accordance with the ASME Boiler and Pressure Vessel Code.
MIL-V-18826 - Valve, Globe And Angle, Cast Iron
MIL-V-18827 - Valve, Gate, Bronze, 300 Psi
MIL-V-19067 - Valves, Check, Controllable, Hydraulic, Aircraft, Type Ii Systems
This specification covers hydraulic controllable check valves for use in Type II aircraft hydraulic systems conforming to and as defined in Specification MIL-H-5440. The complete specification for these valves consists of Specification MIL-H-8775 which covers general requirements common to all aircraft hydraulic components, and this specification which includes additional requirements specifically applicable to such controllable check valves.
MIL-V-19069 - Valve, Check, Hydraulic, Aircraft, Type Ii Systems
This specification covers hydraulic check valves for use in type II aircraft hydraulic systems conforming to specification MIL-H-5440.
MIL-V-20062 - Valves, Composition, Angle And Globe, Flared-End (200 Pounds Working Pressure, 425 Deg. F. Maximum Temperature) (For 1/4 To 1/2 Inch O.D. Copper Tubing)
MIL-V-20063 - Valve, Plug, Lubricant Sealed
MIL-V-20065 - Valve, Angle, Pressure Relief, Naval Shipboard, For Steam Service
This specification covers spring loaded pressure relief valves for steam service.
MIL-V-20223 - Valve, Forged Steel, Etc (Use Mil-V-22094)
MIL-V-2042 - Valves, Reducing, Water Service For Naval Shipboard Use (S/S By Astm-F1370)
MIL-V-21127 - Valves, Globe, Throttling, And Stop Check Nuclear Plant Service
MIL-V-21128 - Valves, Check, Horizontal Lift And Swing, Nuclear Plant Service
MIL-V-21194 - Valve, Gate, Manual, Nuclear Plant Service
MIL-V-21493 - Valve, Pressure Relief, Nuclear Plant Jervice
MIL-V-2187 - Valve, Angle And Globe, Manually Operated, Naval Shipboard, Magazine Sprinkling And Test Fittings,
MIL-V-22052 - Valve, Stop And Stop Check, Globe, Angle, And Y Pattern, Cast Or Forged Carbon Or Alloy Steel, Outside Screw And Yoke (Sizes 2-1/2 Inches And Larger)
This specification covers steel globe, angle, and Y pattern valves in sizes 2-1/2 inches and larger.
MIL-V-22094 - Valve, Globe, Stop Check, Angle And Y, Flanged Bonnet, Manually Operated (Sizes 2 Inches And Below) (See Notice 1 For Replacement Information)
MIL-V-22133 - Valves, Resilient And Metal Seated, Butterfly Working Pressure Up To 200 Psi, 180 Deg. F. Maxium (Shipboard Use) (S/S By Mil-V-24624)
MIL-V-22549 - Valve, Angle, Relief, For Gas And Oxygen Service (Sizes 2 Inches Lps And Below), Naval Shipboard
This specification covers angle relief valves of pressure tight spring housing construction for gas and oxygen service.
MIL-V-22682 - Valve, Astern (For Shipboard Use)
This specification covers manually operated astern valves for the control of steam to the astern element of a main propulsion turbine.
MIL-V-22687 - Valve, Ball, Naval Shipboard, For Air, Nitrogen, Helium Or Hydraulic Service (Size 2 1/2 Inches Ips And Below)
This specification covers corrosion-resisting steel, bronze, aluminum-bronze and naval brass ball valves in sizes 2-1/2 inches nominal pipe size (nps) and below.
MIL-V-22862 - Valves, Compressor Service, Refrigerant-12
This specification covers manually operated compressor service valves for use with refrigerant-12.
MIL-V-23255 - Valve, Pressure Relief
This specification establishes the requirements for the design, manufacture, inspections and testing of pressure relief valves.
MIL-V-23300 - Valve, Regulating, Fluid Pressure, Crankcase, Refrigerant-12
This specification covers compressor crankcase pressure regulating valves for refrigeration systems using refrigerant-12 and having imput powers of 10 horsepower or less.
MIL-V-23318 - Valve, Regulating, Fluid Pressure, Evaporator, Refrigerant-12
MIL-V-23611 - Valves, Ball
MIL-V-23696 - Valves, Ball, Naval Shipboard, Water Service (Use Mil-Std-438)
MIL-V-23937 - Valves, Globe, Angle, Flanged Bonnet, Quick Change Trim, Manually Operated (Sizes 2 Inches And Below)
MIL-V-24109 - Valve, Globe, Angle, Quick Change Cartridge Trim, High Pressure (H-P.) Hydraulic And Pneumatic (Sizes 1/8- 1 1/4 Inches)
This specification covers the design, construction, test and operating requirements for manually operated quick change cartridge trim globe and angle valves with a nominal pressure rating of 6000 pounds per square inch gage (psig) for use in H.P. hydraulic and pneumatic systems.
MIL-V-24232 - Valve, Pneumatic 4-Way, 2-Position, Manually Operated
This specification covers actuation valves with 45 pounds per square inch gage (psig) ratings used for remote pneumatic operation of submarine EMBT blow valves.
MIL-V-24272 - Valve Manifold, High Pressure Gas Reducing
This specification covers the design, construction, test and operating requirements for high pressure air or nitrogen reducing valve manifolds.
MIL-V-24332 - Valve, Angle Relief, For Liquid Service (Naval Shipboard
This specification covers spring loaded relief valves of totally enclosed spring pressuretight construction for liquid service (except hydraulic oil).
MIL-V-24336 - Valves, Pressure Reducing, For Oxygen Service
This specification covers self-contained reducing valves for gaseous oxygen service. It does not include regulators used for oxygen storage cylinders and generally associated with welding equipment.
MIL-V-24384 - Valve, Pressure Regulating, For Low Pressure Air Or Nitrogen Systems
This specification covers self-contained pressure regulating valves with a nominal pressure rating of 150 pounds per square inch (lb/in2) gauge for service in low pressure air or nitrogen systems.
MIL-V-24394 - Valves, Automatic Shut-Off For Gas Service (Sizes 1/4 To 2 Inches Ips)
This specification covers self-contained shut-off valves for gas (air or nitrogen) service.
MIL-V-24439 - Valve, Oxygen, Helium And Helium Oxygen Mixture, High Pressure For Gas Services
This specification describes valves for high pressure oxygen, helium, and helium oxygen mixture gas services.
MIL-V-24488 - Valve, Three-Way, Mixing, Chilled Water, Quiet Design
MIL-V-24509 - Valves, Flanged, Ball And Plug For Sewage And Sea Water Service
This specification covers flanged ball and plug valves for sewage and seawater service, under pressure or vacuum. Sewage contains seawater with varying amounds of detergents, caustic, acids, human wastes, sediments, oils, greases, solvents, and other chemical agents used on board ship.
MIL-V-24517 - Valve, Steam Pressure Reducing, Quiet Design
This specification covers quiet design, self-contained steam pressure reducing valves for submarines.
MIL-V-24544 - Valve, Lubricating Oil, Back Pressure Regulating, Quiet-Design, For Submarine Systems
MIL-V-24545 - Valve, Distilling Plant, Steam Pressure Reducing, Quiet Design, For Submarine Systems
this specification covers quiet design, self-contained steam pressure reducing valves.
MIL-V-24546 - Valve, Sea Water Feed Pressure Reducing, Quiet-Design, For Submarine Systems
MIL-V-24547 - Valve, Back Pressure Regulating, High Pressure Steam Drain, Quiet-Design, For Submarine Systems
MIL-V-24569 - Valve, Quick-Closing, For Fuel Oil And Auxiliary Steam Emergency Shutdown
This specification covers a flanged, one-way, quick-closing valve for fuel oil up to 1000 pounds per square inch (lb/in2) at ambient temperature, and auxiliary steam service at 600 lb/in2 and 775 deg. F.
MIL-V-24578 - Valve, Globe, Pressure Instrument, Stem Test Connection, Union End
This specification covers 1/4-inch outside diameter (od), union end globe valve with a stem test connection.
MIL-V-24586 - Valve, Needle, Size 1/4-Inch And 1/2-Inch, Union Bonnet Construction
This specification covers the requirements of 1/4 inch and 1/2 inch sized needle valves.
MIL-V-24598 - Valve, Lithium Bromide Steam Control, Quiet Operation
This specification covers quiet design, air diaphragm operated control valves for the control of steam to a lithium bromide plant.
MIL-V-24619 - Valve, Quick Closing, For Saturated Steam Service
This specification covers quick closing valves for saturated steam service which are hydraulically actuated.
MIL-V-24624 - Valve, Butterfly, Wafer & Lug Style, Shipboard Service
This specification describes wafer and lug style butterfly valves for shipboard service.
MIL-V-24630/2 - Valves, Check, In-Line, For Hydraulic Fluid And Lubricating Oil Fluid
MIL-V-24658 - Valve Manifolds, Quiet Design, High Pressure Gas Reducing
This specification covers the design, construction, test, and operating requirements for quiet design, high pressure air or nitrogen reducing valve manifolds.
MIL-V-24740 - Valve, Safety: Boiler, Remote Pilot Operated, For Shipboard Use
This specification covers a high-performance boiler safety valve with a remote, hydraulic, non-steam flow pilot assembly, for steam drum and superheater service at working pressures of 600 and 1500 pounds per spuare inch (lb/in2).
MIL-V-25023 - Valve, Fuel Drain, Self-Locking
This specification covers self-locking fuel drain valves suitable for use in aircraft fuel systems. They are intended for use with hydrocarbon fuels only.
MIL-V-25029 - Valve, Fuel Level Control, Integral, Float-Operated, General Specification For (Asg) (S/S By Mil-V-38003)
MIL-V-25169 - Valves, Oxygen, Aircraft, 300-Psig Converter, Relief (Asg) (S/S By Mil-V-9050)
MIL-V-25302 - Valves, Oxygen, Aircraft, 70-Psig Converter, Relief (S/S By Mil-V-9050)
MIL-V-25469 - Valves, Filler, Liquid Oxygen, Aircraft Type
MIL-V-25513 - Valve, Check, For 300 Psi Liquid Oxygen Converter Systems Type Mh-1
This specification covers check valves for use in multiple installations of liquid oxygen converters having working pressures of 300 pounds per square inch gage (psig).
MIL-V-25575 - Valve, Regulating, Fluid Pressure, Aircraft Oxygen System, General Specifications For
MIL-V-2741 - Valve, Pump, Synthetic Rubber
MIL-V-28513 - Valve, Tank Filling, Automatic (For Tanks, Fabric, Collapsible)
MIL-V-2961 - Valves, Globe, Pressure Reducing, Gas Service
This specification covers self-contained globe (in-line and offset) pressure reducing valves for gas (air or nitrogen) service intended for shipboard and marine environment use.
MIL-V-2962 - Valve, Pressure Regulating, Boiler Fuel Oil
This specification covers boiler fuel-oil pressure regulating valves.
MIL-V-38003 - Valve, Fuel Level Control, Fuel Tank, Aircraft General Specification For
MIL-V-4501 - Valve, Automatic Regulating Pressure
MIL-V-47306 - Valve, Stop-Lift-Check
MIL-V-47322 - Valve, Selector, General Specification For
This specification defines the requirements for a 3000 pound per square inch gage (psig) selector valve and accessories.
MIL-V-47322/1 - Valve, Selector, Manually Operated
MIL-V-47322/2 - Valve, Selector, Three-Way, Pilot Operated
MIL-V-47322/3 - Valve, Selector, Manually Operated, Stowable Handle
MIL-V-47322/4 - Valve, Selector, Base, Mounting
MIL-V-47322/5 - Valve, Selector, Solenoid Operated
MIL-V-47322/6 - Valve, Selector, Ball
MIL-V-47322/7 - Valve, Selector, Solenoid Operated
MIL-V-47322/8 - Valve, Selector
MIL-V-5019 - Valve, Air Pressure Regulating, Turn And Slip Indicator, Type Me-1
MIL-V-5027 - Valves, Check, Oxygen, High Pressure
This specification covers high-pressure oxygen check valves.
MIL-V-52687 - Valve, Relief, Hydraulic Pressure
MIL-V-52688 - Valve, Hydraulic, Directional Control, Spoon Type
MIL-V-5379 - Valve, Safety, Cabin Air, General Specification For (S/S By Sae-As5379)
MIL-V-5461 - Valve, Vacuum Breaking
This specification covers a vacuum breaking valve for engine-driven air pumps.
MIL-V-5519 - Valves, Regulating Fluid Pressure
This specification covers valves, regulating fluid pressure for use in Type I aircraft hydraulic systems.
MIL-V-5524 - Valve, Check, Hydraulic, Aircraft, Type I Systems (Asg)
This specification covers the detail requirements for aircraft hydraulic check valves for use in type I systems (-65 Deg to +160 Deg F).
MIL-V-5527 - Valves, Aircraft, Hydraulic Thermal Expansion Relief
The specification establishes the requirements folr hydraulic thermal expansion relief valves of the types and classes specified herein.
MIL-V-5529 - Valves, Hydraulic Directional Control, Rotary Selector
This specification establishes the requirements for rotary selector hydraulic directional control valves for use in type I (-650 to 1600 F fluid temperature range) aircraft hydraulic systems as defined in MIL-H-8775).
MIL-V-5530 - Valves, Aircraft Hydraulic Shuttle
This specification covers one type (3000 PSI operating pressure) of aircraft hydraulic shuttle valves for use in Type I aircraft hydraulic systems.
MIL-V-55341 - Valve, Pressure Relief
This specification covers a low pressure relief valve for use in battery cases to prevent hydrogen gas build-up, emitted from magnesium dry batteries.
MIL-V-58039 - Valve, Gate, Rising Stem, Double Acting Aluminum (S/S By A-A-59379)
This specification covers 3-, 4-, and 6-inch double acting, rising stem, aluminum, gate vaves (lightweight) for use with liquid petroleum supply systems.
MIL-V-6125 - Valve, Regulating, Fluid Pressure, Type C-1
This specification covers the general requirements for one type of gaseous fluid pressure valve, designated Type C-1.
MIL-V-6129 - Valve, Check, Vacuum And Pressure System
This specification covers one type of air check valve.
MIL-V-6405 - Valve, Check, Two-Way, Bromochloromethane Aircraft Fire Extinguishing System
MIL-V-81356 - Valve, Fuel System Pressurization And Vent
This specification covers one type of valve assembly for use in aircraft fuel tanks to sense and relieve positive or negative tank pressures and control pressurization and venting of the tank during fuel transfer and refueling operations.
MIL-V-81552 - Valve, Exhalation, Oxygen Mask, Pressure Compensating, With Safety Relief
This specification covers one type of pressure compensating oxygen mask exhalation valve with safety relief.
MIL-V-81940 - Valve, Sampling And Bleed, Hydraulic, Type Ii Systems
This specification covers hydraulic sampling and bleed valves suitable for use in aircraft and missile high pressure hydraulic systems.
MIL-V-81940/1 - Valve, Sampling And Bleed, Hydraulic, Type Ii Systems
MIL-V-81940/2 - Valve, Sampling And Bleed, Hydraulic, Type Ii Systems Nptf Fitting
MIL-V-81940/3 - Valve, Sampling And Bleed, Hydraulic, Type Ii Systems 37 Deg. Flare Fitting
MIL-V-82026 - Valves, Diaphragm, Stop(S/S By Mss-Sp88)
MIL-V-8612 - Valve, High Pressure Oxygen Line
This specification covers one type of high-pressure oxygen line valve.
MIL-V-8620 - Valve, Check, Oxygen, High Pressure, Filter Connect (Use Mil-V-5027)
MIL-V-8712 - Valve, Air Relief, Low Pressure8(Asg) (S/S By Sae-As8712)
This specification covers the requirements for one type of low-pressure relief valve for use in pressurized shipping containers.
MIL-V-8813 - Valve, Aircraft, Hydraulic Pressure Relief, Type Ii Systems (Asg)
This specification covers hydraulic pressure relief valves for use in type II aircraft hydraulic systems conforming to, and defined by Specification MIL-H-5440.
MS16858 - ( Images) Valve, Gas Inlet, Nonmagnetic
MS17243 - ( Images) Valves, Angle, Shut-Off, Packed, Receiver, Refrigerant-12
MS17797 - Valve, Regulating, Fluid Pressure, (Water) Refrigerant-12
MS17846 - ( Images) Valve, Regulating, Fluid Pressure, Crankcase, Refrigerant-12
MS17854 - Valve, Pressure Regulating, Evaporator, Refrigerant-12
MS17982 - ( Images) Valves, Expansion, Thermostatic, Refrigerant-12 (R-12) And Refrigerant-22 (R-22)
MS18014 - ( Images) Valve - Pressure Equalizing
MS18282 - ( Images) Relief Valve Operating Characteristics Versus Maximum Operating Pressure For Liquid Service
MS18283 - ( Images) Relief Valve Operating Characteristics Versus Maximum Operating Pressure For Steam And Gas Service
MS18284 - ( Images) Regulating And Control Valves Accuracy Of Regulation Requirement
MS21211 - ( Images) Valve, Check, Aircraft Low Pressure Oxygen Systems
MS21430 - ( Images) Valve, Check, Fuel And Air, Poppet Type, Zero, Leak
MS22012 - ( Images) Valve - High-Pressure Oxygen-Cylinder, Automatic Opening (S/S By Mil-Prf-8622)
MS22035 - ( Images) Valve, Check, Oxygen, High Pressure, Filler Connection
MS22056 - ( Images) Valve, Check, Oxygen Mask, Inlet
MS24423 - ( Images) Valve, Check, Miniature Hydraulic, Aircraft And Missile, -65 Deg. F To +450 Deg. F, 3,000 Psi, Flareless Tube (S/S By Mil-Prf-25675)
MS24593 - ( Images) Valve, Check, Miniature Hydraulic, Aircraft And Missile, -65 Deg. F To +450 Deg. F, 3,000 Psi, Flared Tube
MS27611 - ( Images) Valve, Hydraulic Bleeder, Aircraft Wheel Brake
MS27612 - ( Images) Adapter, Hydraulic Bleeder Valve, Aircraft Wheel Brake
MS28016 - ( Images) Valve - Hydraulic Dual Thermal Expansion Relief
MS28050 - ( Images) Valve, Check, Low, Pressure Internal Threads
MS28051 - ( Images) Valve, Static Pressure Selector (Asg)
MS28052 - ( Images) Valve, Check, Pressure Gage Lines Bleeder And Filler
MS28764 - ( Images) Valve, Check, Controllable, Rotary-Action, Hydraulic, 3,000 Psi, Type Ii Systems (Asg)
MS28765 - ( Images) Valve, Check, Hydraulic, Internal Ports 3,000 Psi. Type Ii Systems
MS28766 - ( Images) Valve, Shuttle, Hydraulic, Direct Mounting, 3000 Psi Type Ii Systems
MS28767 - ( Images) Valve, Shuttle, Hydraulic, Internal Thread, Tube Fitting Outlet, 3000 Psi, Type Ii Systems
MS28768 - ( Images) Valve, Check, Controllable, Plunger-Type, Hydraulic, 3,000 Psi, Type Ii Systems (Asg)
MS28882 - ( Images) Valve, Fuel Check, Low Pressure, Gasket Seal Straight Thread Connection
MS28884 - ( Images) Valve, Fuel Check, Low Pressure, Flared Tube Connection
MS28886 - ( Images) Valve, Aircraft Hydraulic Flow Regulator
MS28887 - ( Images) Valve, Relief, Cylindrical, Type Ii System
MS28888 - Valve, Pneumatic Check (Asg)
MS28889 - ( Images) Valve, Air, High Pressure Charging, 5000 Psi (S/S By Mil-Prf-6164)
MS29521 - ( Images) Disk, Valve
MS29528 - ( Images) Valve-Fuel Drain, Self-Locking Poppet
MS29529 - ( Images) Valve - Fuel Drain, Self-Locking, Tank Mounted
MS29530 - ( Images) Valve-Fuel Drain, Self-Locking, Line Mounted
MS29571 - ( Images) Cock, Poppet Drain
MS35670 - ( Images) Valve, Safety Relief
MS35782 - ( Images) Cock, Drain, Center Drain, 150 P.S.I. (S/S By A-A-59440/1)
MS35783 - ( Images) Cock, Drain, With Hose Bib, 150 P.S.I. (S/S By A-A-59440/2)
MS35784 - ( Images) Cock Drain, Spring Key, 50 P.S.I. (S/S By A-A-59440/3)
MS35785 - ( Images) Cock, Drain, Ground Key, 150 P.S.I. Steam Pressure (S/S By A-A-59440/4)
MS35786 - Cock, Drain, Ground Key, Long Shank, 125 Psi Steam Pressure (S/S By Ms35785)
MS35787 - ( Images) Cock, Drain, Ground Key, Bib Nozzel, 150 P.S.I. Steam Pressure (S/S By A-A-59440/5)
MS35880 - ( Images) Valve, Packless Stop, Solder-Joint Connection Ends
MS35930 - ( Images) Cock, Plug, Spring Key, Threaded Type, 50 P.S.I. (S/S By A-A-59440/8)
MS35931 - ( Images) Cock, Plug. Ground Key, Threaded Type, 125 P.S.I. (S/S By A-A-59440/9)
MS35932 - ( Images) Cock, Plug, Three Way, Threaded Type, 125 P.S.I. (S/S By A-A-59440/6)
MS35934 - ( Images) Cock, Shut-Off, Screw Stem, Threaded Type, 150 P.S.I. (S/S By A-A-59440/7)
MS90338 - ( Images) Valve, High Pressure Oxygen Check, Flareless Ends
MSS-SP6 - Valves And Fittings, Contact Faces Of Pipe Flanges And Connecting-End Flanges Of
This standard pertains to the finish of gasket contact faces of pipe flanges and end flanges of valves and fittings.
MSS-SP61 - Valves, Steel, Pressure Testing Of
This Standard Practice covers requirements and acceptance criteria for shell and seat closure pressure testing of steel valves.
MSS-SP70 - Gate Valves, Cast Iron, Flanged And Threaded
This standard practice covers cast iron gate valves with flanged or threaded ends.
MSS-SP71 - Valves, Gray Iron Swing Check, Flanged And Threaded Ends
This standard practice covers cast iron swing check valves with flanged and threaded ends for general purpose service in essentially horizontal lines. The use of swing check valves in steeply inclined or vertical lines requires special consideration.
MSS-SP72 - Valves, Ball, With Flanged Or Butt-Welding Ends For General Service
This Standard Practice covers flanged or butt-weld end ball valves having in general, but not restricted to, round openings which may be full port, regular port types.
MSS-SP80 - Bronze Gate, Globe, Angle And Check Valves
This standard practice covers bronze gate, globe, angle, and check valves for general purpose service and provides requirements for the following.
QPL-15358-5 - Valve, Automatic Regulating, (Pressure Diaphragm Actuated And Controls, For Hi-Octane Gasoline Systems, 125 P.S.I. Maximum W.P., 140 Degrees F. Minimum)
QPL-16468-16 - Valves, Shutoff, Hydrocarbon Fuel Service 100 P.S.I. And 150 P.S.I. Working Pressure
QPL-17462-12 - Valve, Safety, Boiler (Shipboard Use)
QPL-17848-25 - Valve, Pressure Reducing, Steam Service (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-18030-10 - Valves, Pressure Control, Diaphragm Operated, External Air Pilot Actuated, Steam And Fresh Water Service
QPL-18110-29 - Valves, Gate, Cast Or Forged Steel And Alloy Steel, Outside Screw And Yoke (Sizes 2-1/2 Inches And Larger)(Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-18916-10 - Governors, Steam Driven Pump, Pressure Regulating, Naval Shipboard
QPL-19067-7 - Valves, Check, Controllable, Hydraulic, Aircraft, Type Ii Systems
QPL-19068-12 - Valves, Shuttle, Hydraulic, Aircraft, Type Ii Systems
QPL-19069-22 - Valves, Check, Hydraulic, Aircraft, Type Ii Systems (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-19180-43 - Regulators, Pressure, Compressed Gas
QPL-19772-42 - Valves, Temperature Regulating, Automatic, Naval Shipboard (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-2042-27 - Valves, Reducing, Water Service, For Naval Shipboard Use
QPL-22052-27 - Valve, Stop And Stop Check, Globe, Angle, And Y Pattern, Cast Or Forged Carbon Or Alloy Steel, Outside Screw And Yoke (Sizes 2-1/2 Inches And Larger) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-22133-25 - Valve, Butterfly, Working Pressures Up To 200 P.S.I. 150 F. Max. (For Shipboard Use)
QPL-22687-17 - Valve, Ball, Naval Shipboard, For Air, Nitrogen, Helium Or Hydraulic Service (Sizes 2-1/2 Inches I.P.S. And Below)
QPL-23696 - Valve, Ball, Naval Shipboard, Water Service
QPL-23937 - Valves, Globe, Angle, Flanged Bonnet, Quick Change Trim, Manually Operated (Sizes 2 Inches And Below)
QPL-23953-11 - Valve, Combined Vent Check For Submarine Mbt Blow Lines (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-24109-10 - Valves, Globe, Angle, Quick Change Cartridge Trim, High Pressure (H.P.) Hydraulic And Pneumatic (Sizes 1/8 - 1-1/4 Inches) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-24232-6 - Valve, Pneumatic, 4 Way - 2 Position And 4 Way - 3 Position, Manually Operated
QPL-24439-12 - Valves, Oxygen, Helium And Helium Oxygen Mixture, High Pressure For Gas Services (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-24517-8 - Valve, Steam Pressure Reducing, Quiet Design (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-24624-16 - Valves, Butterfly, Wafer And Lug Style, Shipboard Service (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-24630-6 - Valves, Check, In-Line, For Hydraulic Fluid And Lubricating Oil Fluid (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-25023-23 - Valve, Fuel Drain, Self-Locking (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-25169-19 - Valve, Oxygen, Aircraft, 300 Psig Converter, Relief
QPL-25302-3 - Valve, Oxygen, Aircraft, 70 Psig Converter, Relief
QPL-25469-11 - Valves, Filler, Liquid Oxygen, Aircraft Type (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-25675-22 - Valves, Check Miniature, Hydraulic, Aircraft And Missile (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-25961-21 - Valve, Fill-Buildup-Vent, Liquid Oxygen Converter, Cru-50/A (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-25962-15 - Valves, Liquid Oxygen Drain (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-2961-10 - Valve, Pressure-Reducing, Air (Shipboard Use)
QPL-2962-2 - Valve, Regulating, Fuel-Oil-Pressure
QPL-3155-16 - Valve, Temperature Regulating Ventilation Heater, Steam Control, Naval Shipboard Use (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-5019-2 - Valve, Air Pressure Regulating, Turn And Slip Indicator, Type Me-1
QPL-5519-25 - Valves, Regulating Fluid Pressure
QPL-5524-24 - Valves, Check, Hydraulic, Aircraft, Type 1 Systems (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-5527-17 - Valves, Aircraft, Hydraulic Thermal Expansion Relief
QPL-5530-28 - Valves, Aircraft Hydraulic Shuttle (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-6405-6 - Valve, Check, Two-Way, Bromochloromethane, Aircraft Fire Extinguishing System
QPL-6607-3 - Valve, Oxygen Pressure Reduction
QPL-7899-20 - Valve, Check, Aircraft Fuel System (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-81356-12 - Valve, Fuel System Pressurization And Vent
QPL-81940-12 - Valve, Sampling And Bleed, Hydraulic, Type Ii Systems (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-8620-1 - Valves, High Pressure Oxygen Check Filler Connection
QPL-8628 - Valve, Pneumatic Check
QPL-8712-2 - Valve, Air Relief, Low Pressure
QPL-8813-13 - Valves, Aircraft, Hydraulic Pressure Relief, Type Ii Systems (Replaced By The Qualified Products Database (Qpd) See Notice 2 For Additional Information)
QPL-9050-16 - Valves, Oxygen, Pressure Relief, Aircraft (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-9198-8 - Regulator, Oxygen, High Pressure, Type Ma-1
UL262 - Gate Valves For Fire Protection Service
These requirements cover gate valves intended for installation in piping systems supplying water for fire-protection service.
WW-V-1967 - Valve, Butterfly (Threaded Ends) Brass Or Bronze
WW-V-1967 - Valve, Butterfly (Threaded Ends) Brass Or Bronze
WW-V-35 - Valve, Ball (Ss By Mss Sp-72 And Mss Sp-110)
WW-V-51 - Valve, Angle, Check, & Globe, Bronze (125, 150 & 200 Pound, Threaded End, Flange Ends, Solder Ends, & Brazed End, For Land Use) (S/S By Mss-Sp80)
WW-V-54 - Valve, Gage, Bronze (125, 150 And 200 Pound, Screwed Flanged, Solder End, For Land Use)
WW-V-58 - Valve, Gate, Cast Iron; Threaded & Flanged (For Land Use) (S/S By Mss Sp-70)
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business