MIL-PRF-8622C
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
ASME - B46.1
-
Surface Texture (Surface Roughness, Waviness,
and Lay) (DoD adopted)
ASME - Y14.5
-
Dimensioning and Tolerancing
(Application for copies should be addressed to the American Society Of Mechanical
Engineers, 345 East 47th Street, New York, NY 10017.)
AMERICAN NATIONAL STANDARD INSTITUTE (ANSI)
ANSI- Z1.4
-
Sampling Procedures and Tables for
Inspection by Attributes (DoD adopted)
(Application for copies should be addressed to American National Standard Institute, 11
West, 42nd Street, New York, NY 10036.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM-D1149
-
Rubber Deterioration, Surface Ozone Cracking in a
Chamber Standard Test Method for (DoD adopted)
ASTM-G63
-
Nonmetallic Materials for Oxygen Service Standard
Guide for Evaluating
ASTM-G72
-
Standard Test Method For Autogeneous Ignition
Temperature of Liquids and Solids in a High
Pressure Oxygen Enriched Environment
ASTM-G94
-
Metals for Oxygen Service, Standard Guide for
Evaluating
(Application for copies should be addressed to the American Society for Testing and
Materials 100 Barr Harbor Drive, Philadelphia, PA 19103.)
2.4 Order of precedence. In the event of a conflict between the text of this specification and the
references cited herein, the text of this specification takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection
in accordance with 4.2.
3.2 Materials. Materials used shall be selected from the applicable government or non-
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business