MIL-DTL-3155D(SH)
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-S-901
-
Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and Systems,
Requirements for
MIL-F-1183
-
Fittings, Pipe, Cast Bronze, Silver-Brazing, General Specification for
(Copies of these documents are available online at https://quicksearch.dla.mil/ or https://assist.dla.mil.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI/ASQ Z1.4
-
Sampling Procedures and Tables for Inspection by Attributes
(Copies of this document are available from the American National Standards Institute, 25 W. 43rd Street, 4th Floor,
New York, NY 10036 or online at https://webstore.ansi.org/.)
ASTM INTERNATIONAL
ASTM A276
-
Standard Specification for Stainless Steel Bars and Shapes
ASTM B61
-
Standard Specification for Steam or Valve Bronze Castings
ASTM B584
-
Standard Specification for Copper Alloy Sand Castings for General Applications
(Copies of these documents are available from ASTM International, 100 Barr Harbor Dr., P.O. Box C700, West
Conshohocken, PA 19428-2959 or online at www.astm.org.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between
the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Qualification. The temperature-regulating valves furnished under this specification shall be products that
are authorized by the qualifying activity for listing on the applicable qualified products list before contract award
3.2 Description.
3.2.1 Temperature-regulating valve. The temperature-regulating valve shall consist of the basic valve body
model, valve seat(s) and valve poppet(s), and the thermostat type(s) necessary to accomplish the designated
function.
3.2.2 Thermostat. A thermostat shall consist of steam actuated bellows, union nut, armored capillary tubing,
and bulb.
3.3 Materials.
3.3.1 Temperature-regulating valve materials. Materials used in the temperature-regulating valve shall be
high-grade, free from defects, and suitable for the purpose intended.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business