MIL-DTL-27166F
TYPE II Pressure relief
Reseal pressure
¼ psi (1.7 kPa)
Reseal pressure
½ psi (3.4 kPa)
Reseal pressure
1 psi (6.9 kPa)
Reseal pressure
2 psi (13.8 kPa)
Reseal pressure
3 psi (20.7 kPa)
Reseal pressure
5 psi (34.5 kPa)
TYPE III Pressure and vacuum relief
Reseal pressures
½ psi (3.4 kPa) pressure, ½ psi (3.4 kPa)vacuum
Reseal pressures
1 psi (6.9 kPa), ½ psi (3.4 kPa) vacuum
Reseal pressures
1 psi (6.9 kPa), 1 psi (6.9 kPa) vacuum
Reseal pressures
1 ½ psi (10.4 kPa) pressure, 1 ½ psi (10.4 kPa) vacuum
Reseal pressures
2 psi (13.8 kPa) pressure, 1 psi (6.9 kPa) vacuum
Reseal pressures
2 psi (13.8 kPa) pressure, 2 psi (13.8 kPa) vacuum
Reseal pressures
3 psi (20.7 kPa) pressure, 2 psi (13.8 kPa) vacuum
Reseal pressures
5 psi (34.5 kPa) pressure, 2 psi (13.8 kPa) vacuum
2.
APPLICABLE DOCUMENTS
2.1
General
The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended
for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified
requirements of documents cited in sections 3 and 4 of this specification, whether or not they
are listed.
2.2
Government documents.
2.2.1 Specifications, standards, and handbooks.
The following specifications, standards, and handbooks form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract.
FEDERAL STANDARDS
FED-STD-H28
Screw-Thread Standards for Federal Services
COMMERCIAL ITEM DESCRIPTIONS
A-A-59588
Rubber, Silicone
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business