MS29571E
TABLE I. Tolerance
DASH NO. |
T (b) |
A (c) |
B (c) |
C (c) |
D + .005 |
E |
F |
G |
MS 29571-1 |
.7500-16UNJF-3A |
1.061 |
1.562 |
1.281 |
.798 |
1.23 |
.38 |
.70 |
MS 29571-2 |
1.0625-12UNJF-3A |
1.374 |
1.874 |
1.593 |
1.110 |
1.96 |
.60 |
1.20 |
MS 29571-3 |
1.3125-12UNJF-3A |
1.624 |
2.124 |
1.843 |
1.360 |
2.27 |
.60 |
1.30 |
MS 29571-4 |
1.6250-12UNJF-3A |
1.874 |
2.375 |
2.093 |
(b) |
2.27 |
.60 |
1.30 |
MS 29571-5 |
.875-14UNJF-3A |
NIA |
1.130 |
NIA |
NIA |
.927 |
.33 |
.48 |
NOTES:
(a) Configuration and number of inlet ports in valve optional except that the valve shall meet the requirements of
MIL-V-25023 when tank mounted using max (.500) and min (.188) tank wall thickness. (b) Dimension T controls screw thread dimension per SAE-AS8879.
(c) Diameters are to be concentric within .005 total indicator reading. REQUIREMENTS:
Material: See procurement specification -- MIL-V-25023. Surface texture: Texture is per ANSI B46.1-2009.
Burrs and edges: Remove burrs and break sharp edges. Holes: Chamfer all holes.
Dimensions: dimensions in inches unless otherwise specified.
Custodians: Preparing Activity: Navy - AS
Air Force - 71 Air Force - 71
Review Activities: (Project No. 4820-2013-010) Air Force - 99
DLA - CC
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:IIassist.dla.mil.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business