MS28050B
Part or Identifying Number (PIN) |
A max (mm) |
B max (mm) |
c ±.0625 (1.16mm) |
D min (mm) |
Weight max (lb) (mm) |
Boss AND10050 |
Gasket two each required SAE-AS28778 |
Tubing size (ref) OD (mm) |
|
MS28050-1 |
1.750 (44.45) |
1.125 (28.58) |
2.250 (57.15) |
0.250 (6.35) |
0.300 (7.62) |
-4 |
-4 |
0.250 (6.35) |
|
MS28050-2 |
2.000 (50.80) |
1.125 (28.58) |
2.500 (63.50) |
0.250 (6.35) |
0.300 (7.62) |
-6 |
-6 |
0.375 (9.53) |
|
MS28050-3 |
2.000 (50.80) |
1.250 (31.75) |
2.500 (63.50) |
0.281 (7.14) |
0.300 (7.62) |
-8 |
-8 |
0.500 (12.70) |
|
MS28050-4 |
2.188 (55.58) |
1.375 (34.93) |
3.000 (76.20) |
0.312 (7.92) |
0.450 (11.43) |
-10 |
-10 |
0.625 (15.88) |
|
MS28050-5 |
2.500 (63.50) |
1.750 (44.45) |
3.500 (88.90) |
0.344 (8.74) |
0.600 (15.24) |
-16 |
-16 |
1.000 (25.40) |
NOTES:
1. Dimensions are in inches, unless otherwise specified.
2. Metric equivalents are given for information only.
3. Tolerances: ± .016 inch (0.41 mm).
FIGURE 1. Valve, check, low pressure, internal threads - continued. REQUIREMENTS:
Dimensions and configurations: See figure 1.
Designed for use with air, coolants and water at pressures not exceeding 50 PSI (3.45 bar). Material in accordance with MIL-V-6129.
Threads in accordance with MIL-V-6129.
Marginal notations. Marginal notations are not used in this revision to identify changes due to the extent of the changes.
Reference documents. In addition to MIL-V-6129, this document references the following: AND10050
SAE-AS28778
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business