MS27612M
Guidance on use of alternative parts with less hazardous or non-hazardous materials. This specification provides an alternate material, corrosion resistant steel, and zinc finish via the PIN. Users should select the PIN with the least hazardous material that meets the form, fit, and function requirements of their application.
Marking: Part shall be permanently marked with the MS PIN, and include the manufacturers CAGE. Table II provides a detailed cross-reference of superseded MS27612 PINs, new MS27612 PINs, and
preferred MS27612 PINs.
TA8LE II. Cross-reference data.
Superseded MS PIN |
New MS PIN |
Preferred MS PIN |
MS27612-5 |
MS27612-5C |
MS27612-7CL |
MS27612-6 |
MS27612-6C |
MS27612-8CL |
MS27612-7 |
MS27612-7CL |
MS27612-7CL |
MS27612-8 |
MS27612-8CL |
MS27612-8CL |
Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
Referenced documents shall be of the issue in effect on date of invitations for bid.
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes.
Referenced documents. This document references the following:
MIL-S-7742
ASME 846.1
ASME Y14.5
ASME Y14.36
ASTM A108
ASTM A564/A564M ASTM A576
ASTM 8117
ASTM 8633
SAE-AMS-S-6758
SAE-AMS-QQ-P-416
SAE-AMS2700
SAE-AMS5659
SAE-AMS5665
SAE-AMS5862
SAE-AMS6349
SAE-AMS6370
SAE-AMS6382
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business