MIL-PRF-62382C
3.6 Painting. The exterior surfaces of the valve shall be prepared, primed or treated, and
painted as suitable for the material of the valve body (see 4.5.2). Color of finish shall be
seafoam green, #24533 of FED-STD-595.
3.7 Marking. The valve shall be marked with the National Stock Number (NSN) and the
manufacturer's name and part number. Marking shall be permanent and legible (see 4.5.2).
3.8 Workmanship. Workmanship shall be of the quality as to assure that valves
furnished under this specification are free of defects that compromise, limit, or reduce
performance in intended use (see 4.5.2).
4. VERIFICATION
4.1 Classification of inspection. The inspection conditions specified herein are classified
as follows:
a. First article inspection (see 4.2)
b. Conformance inspection (see 4.3)
4.2 First article inspection. Unless otherwise specified (see 6.2), first article inspection
shall be performed on preproduction or initial production samples as specified when a first article
sample is required (see 3.1). This inspection shall include the examinations of 4.4 (see table II)
and the tests of 4.5.4.1 through 4.6 (see table III).
TABLE II. Classification of defects.
Method of
Category
Defect
examination
Major:
101
Dimensions affecting interchangeability, not within
SIE 1/
tolerance (see 3.3).
102
End cap safety-lockwiring, not to requirements
Visual
(see 3.3.1).
103
Identification marking, improper (see 3.7).
Visual
104
Faulty workmanship affecting performance (see 3.8).
SIE
Minor:
201
Dimensions not affecting interchangeability, not
SIE and
within tolerance (see 3.3).
Visual
202
Painting, improper (see 3.6).
Visual
203
Faulty workmanship affecting appearance (see 3.8).
Visual
1/ SIE = Standard Inspection Equipment.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business