INCH-POUND
MIL-PRF-25962F
19 December 2013
SUPERSEDING
MIL-PRF-25962E
15 January 2008
PERFORMANCE SPECIFICATION
VALVE, LIQUID OXYGEN DRAIN
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers one type of valve for draining 70 and 300 pounds
per square inch gage (psig) liquid oxygen converters.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of
this specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of these lists, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification,
whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to Oklahoma
City Air Logistics Center/ENSDAA, 3001 Staff Drive, Suite 1AB81A, Tinker AFB, OK
73145 or emailed to tinker.dsp@tinker.af.mil. Since contact information can change, you
may want to verify the currency of this address information using the ASSIST Online
database at https://assist.dla.mil.
AMSC N/A
FSC 4820
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business